Xin chào!

Tìm những job khác

Tìm việc làm trực tiếp

Manufacturing Engineer

Jabil Vietnam
Ngày cập nhật: 01/08/2025

Thông tin tuyển dụng

Phúc lợi

  • Laptop
  • Chế độ bảo hiểm
  • Du Lịch
  • Phụ cấp
  • Xe đưa đón
  • Đồng phục
  • Chế độ thưởng
  • Chăm sóc sức khỏe
  • Đào tạo
  • Tăng lương
  • Nghỉ phép năm
  • CLB thể thao

Mô tả công việc

Monitor the quality and efficiency performance for assigned manufacturing line(s). Drive continuous improvement through process development, root cause analysis and systematic problem solving; utilize data from CIQ, TARS and other sources as appropriate.
ESSENTIAL DUTIES AND RESPONSIBILITIES include the following. Other duties may be assigned.
· Continually strive to balance and optimize line throughput, including efforts to minimize changeover downtime (i.e. common set-ups).
· Monitor machine management data in order to maximize utilization and minimize machine-generated scrap.
· Provide input on creative ways to reduce costs by streamlining processes and systems.
· Create and maintain wave and reflow soldering profiles.
· Ensure that process parameters are within acceptable tolerances for products and components, and result in solder quality that meets IPC-610B requirements (or other applicable standard).
· Design and / or procure production tooling, including stencils, vacuum plates, wave solder pallets and product-specific fixtures and jigs.
· Coordinate line reconfigurations and machine move activities, including equipment arrival, positioning and installation, and scheduling of support groups (Machine Support, Facilities, MIS, etc.) using the approved communication process.
· Verify that machine maintenance is performed as scheduled on assigned line(s).
· Encourage open communication and exchange of information within the M.E. department and between the various support groups.
· Adhere to all safety and health rules and regulations associated with this position and as directed by supervisor.
· Comply and follow all procedures within the company security policy.

Yêu cầu công việc

  • Bachelor degree in Mechanical/Electrical Engineering/Mechatronics or relevant major.
  • Experience in SMT environment trouble shooting knowledge is highly preferred.
  • Minimum 3 years of experience in a high volume, automated and technological manufacturing of Printed Circuit Board Assemblies or in a similar capacity.
  • Experience in high volume production and automated manufacturing environment.
  • Good at English (4 skills)

Thông tin khác

  • Bằng cấp: Bachelor
  • Độ tuổi: 25 - 30
  • Hình thức: Nhân viên chính thức

Giới thiệu về công ty

Jabil Vietnam

http://www.jabil.com Tổng số nhân viên: 2,600+

Jabil Vietnam Company Limited is a US-based multinational electronics solutions company providing comprehensive electronics design, production and product... Xem thêm

Việc làm tương tự